You have not viewed any product yet.
Transport and store with ease
Fitted with an ergonomic carry handle and with a foldable tiller handle means they are easy to transport.
Low vibration
Innovative rubber mounts developed by Honda keep vibration level extremely low.
Easy start
Equipped with Honda’s decompression mechanism, minimum effort is required on the recoil to start the engine.
Convenient gear shift
It has an ergonomic gearshift to move forward, reverse or be in neutral position.
Look after your prop and your engine
The engine is light and easy to tilt up and out of the water that means the propeller blades are protected from damage in the shallows or at the water’s edge. Its spring design allows it to be safely locked down when you head off again.
Inbuilt protection
This engine has an oil alert system, which will immediately warn you if any drop in pressure is detected while automatically reducing engine revs to a lower and safer level.
4Front Corrosion Protection
This engine goes through a four layer coating process. The aluminium casing with patented ‘Double Seal’ process. Then an epoxy primer is applied before the shimmering silver paint. For further protection from UV rays, a clear resin topcoat is applied to finish. And to be absolutely sure, a sacrificial anode is fitted and all connectors are waterproof.
The Honda way
Founder, Soichiro Honda, wanted to ensure our outboard engines were cleaner, quieter and friendlier to the environment – so he made them 4-stroke. This made Honda pioneers in marine engine technology. Therefore, as you accelerate away, you can have peace of mind in the fact that the clean water you are boating through will be staying that way.
Watertight warranty
Every Honda Marine customer has the support of a domestic or professional warranty, so you’re covered whatever the use. It will also maintain the same value throughout its warranty period - that means your last day of cover is as good as your first.
Specification
Honda Brochure
YOU MAY ALSO LIKE
-
Volvo Penta Inboard Shaft Range – D2: 50, 60 or 75 HP
Call for PriceVolvo Penta D2 is an in-line 4-cylinder, 2.2-liter, naturally aspirated diesel engine using a camdriven, in-line injection pump, and freshwater cooling. With low cruising rpm, the engine runs quietly with minimal vibrations. -
Volvo Penta Inboard Shaft Range: D1-13
Call for PriceVolvo Penta D1 is an in-line 2-cylinder, 0.5-liter, naturally aspirated diesel engine using a camdriven, in-line injection pump, and freshwater cooling. With low cruising rpm, the engine runs quietly with minimal vibrations. -
Volvo Penta Inboard Shaft Range: D1 20
Call for PriceVolvo Penta D1 is an in-line 2-cylinder, 0.5-liter, naturally aspirated diesel engine using a camdriven, in-line injection pump, and freshwater cooling. With low cruising rpm, the engine runs quietly with minimal vibrations. -
Volvo Penta Inboard Shaft Range: D1-30
Call for PriceVolvo Penta D1-30 is an in-line 3 cylinder, 1.1 litre, naturally aspirated diesel engine using a cam driven, in-line injection pump, and freshwater cooling. With low cruising rpm, the engine runs quietly with minimal vibrations.